When installing the drag chain, pay attention to arranging the cables neatly first and not bundling them into a ball, because when the drag chain withstands the operation and movement of the equipment, the cables are not arranged neatly and can easily affect the service life of the cables. You also need to pay attention to the drag chain cables. The bend cannot bear force, and a corresponding spacing distance must be left at the bend of the drag chain cable. The spacing distance between cables in the drag chain should be at least 10% of the cable diameter.

Secondly, it should be noted that the cables in the drag chain cannot be twisted. You can first remove the twisting force inside the drag chain cable. When installing, you can first rotate the cable drum to unfold the cable, or you can hang it freely. method for several days. It should also be noted that the two points of the cable must be fixed, at least at the moving end of the drag chain. Generally, the distance between the moving point of the cable and the end of the drag chain should be 20-30 times the diameter of the cable.

Finally, we must pay attention to the minimum bending radius of the cable. When laying cables in the drag chain, pay attention to placing the heavy wires on both sides of the drag chain and the light wires in the middle. The cables can only account for 70% of the drag chain. This can Protect the cables in the drag chain from moving freely during mechanical movements.